For Fasteners, T-Clamps, and Wire Looms for any
Street Rods, Classics, Customs, Muscle cars, Racing,
Marine, Off Road, or RV, the Pros agree:
Home Page T-Clamps Wire Loom Kits Catalog - Contact Us Dealer Support
Markets Served Auto Accessories Tools Product Applications Links
Dealer Locator Spoiler Saver Hose Braiding Tech/FAQ RaceDay Jewelry

 

Chevy Center Bolt Wire Loom Kits

Made For You offers you three methods to mount your spark plug wires on the Center Bolt style valve covers.  Choose from:
  • Our exclusive Bowtie Loom Kit, licensed by General Motors

  • Our popular Center Bolt Kit that mounts directly down the middle of the valve cover

  • Use our Aluminum Bracket kit along with our Vertical Loom Kit (sold separately) to mount off to the side of the valve cover (especially good if you have expensive engraved covers and do not wish to hide them under the wires.)

    Click on images on right for descriptions


 

Bowtie Wire Loom Kit

 

A unique kit that will provide the finishing touch for the true Chevy fan.  Kit contains 2 of the famous Bowtie shaped separators that bolt directly to the valve cover with the extra long stainless steel bolts provided in the kit.  In addition, 4 2-place separators and 2 4-place separators assure that the spark plug wires will be held away from high heat areas.  Designed and manufactured by Made For You Products, L.L.C. under license from General Motors.*

   

Bowtie Center Bolt Kit (Fits 7-8mm Dia. Wire)  Part # 60-730-

Licensed by GMSPO.  General Motors trademarks used under license to Made For You Products, L.L.C.  Official licensed product #MP0901.

   

Color Codes for Wire Looms.  Please add appropriate number to end of part number when ordering.

Black - 11 Blue - 12 Red - 13 Yellow - 15 Teal - 16 Orange - 17 Gray - 19 Purple - 20

Back to Top

"Original" Chevy Center Bolt Kit

One of the most popular ways to organize plug wires on Center Bolt engines, contains the same brackets and wire separators as our part # 50-956 Horizontal Loom Kit, but with longer bolts to replace the factory center bolts.  Gives a neat, professional, custom look while keeping wires out of the high heat areas.  Available for 7-8mm and 10.5mm diameter wires.

   

Center Bolt Chevy Kit (Fits 7-8mm dia. Wire) Part # 50-356-__

Center Bolt Chevy Kit (Fits 10.5mm dia. Wire) Part # 50-310-__

   

Color Codes for Wire Looms.  Please add appropriate number to end of part number when ordering.

Black - 11 Blue - 12 Red - 13 Yellow - 15 Teal - 16 Orange - 17 Gray - 19 Purple - 20

Back to Top

Aluminum Brackets for Center Bolt Chevy

Show off your expensive engraved valve covers!  Using the existing bolt holes in your Chevy heads, this kit attaches part # 50-756 Vertical Wire Loom Kit (sold separately) to your Center Bolt Valve Cover Chevy.  Provides a unique look for your Center Bolt Valve Cover, especially if you are using aftermarket engraved valve covers. Contains four per pack, and includes mounting hardware.

Center Bolt Aluminum Brackets
Part # 50-82494

 

Have a question about Made For You Products?
To contact us direct: (760) 868-6962 or Fax: (760) 868-2131

email.gif (12281 bytes)

Home | Terms | Become a Dealer | Find a Dealer | Sitemap
An Wrench | Auto Wiring Kit | Chassis Clamp | Engine Loom
Spark Plug Wire Looms | T Clamps | Wheel Bolt Pattern Template

Made for You® Products, L.L.C. ©2010

Back to Top