Street Rod Apps

These photos give a few examples of the various methods and applications of Made For You Products Smoothie® Wire Loom kits and T-Clamp® line clamps on a variety of engines and chassis set-ups.

	This is an application using the Universal Separator Kit #50-110 on a Flathead. The wires go through the stainless runners held together by the larger diameter wire loom kit.


Above are several S/B Chevy applications. The left photo uses a Horizontal Kit #50-956 that has the mounting bolts going directly into the heads so that the separators stand vertically below the headers. Center photo is a blown S/B Chevy with tall valve covers and the Vertical Loom Kit #50-756. The right photo is a Horizontal Kit used as designed on the valve cover. It is an 8mm Universal Kit with an extra 2 place separator to run the wires parallel between the headers.

	These are a Chevy using a Vertical Loom Kit along with matching heater hose clamps to maintain the hoses parallel and away from the headers.

Have a question about Made For You Products?
To contact us direct: (760) 868-6962 or Fax: (760) 868-2131