|
Wire Loom Separators for
Most V-8 Applications
|
 |
|
Horizontal
Loom Kit |
|
 |
 |
 |
|
Contains 6 brackets and 2 each 2-place, 3-place, and four 4-place
separators to allow looming all the way to the distributor.
Available in 7-8mm and 10.5mm diameter sizes.
|
|
Horizontal Wire Loom Kit (Fits 7-8mm dia. Wire) Part # 50-956-__ |
|
Horizontal Wire Loom Kit (Fits 10.5mm dia. Wire) Part # 50-910-__ |
Color
Codes for Wire Looms. Please add appropriate number to end of part
number when ordering. |
|
Black - 11 |
Blue - 12 |
Red - 13 |
Yellow - 15 |
Teal - 16 |
Orange - 17 |
Gray - 19 |
Purple - 20 |
|
Vertical
Wire Loom Kit |
|
 |
10.5mm Vertical Loom Kit
Shown above |
  |
Our most popular kit!
Adds another dimension to ignition wire mounting by allowing your wire separators
to be positioned vertically instead of horizontally on your engine. Adjustable to
allow wires to be loomed out of high heat areas, thereby making the application last
longer. Contains 6 brackets and 2 each, 2-place, 3-place, and four
ea., 4-place
separators to loom all the way to the distributor. Available in eight colors for 7-8mm
or 10.5mm diameter wires. |
|
|
|
|
|
Vertical
Wire Loom Kit (Fits 7-8mm dia. Wire) Part # 50-756-__ |
|
Racer Wire
Loom Kit (Fits 10.5mm dia. Wire) Part # 50-710-__ |
Color
Codes for Wire Looms. Please add appropriate number to end of part number when
ordering. |
| Black
- 11 |
Blue
- 12 |
Red
- 13 |
Yellow
- 15 |
Teal
- 16 |
Orange
- 17 |
Gray
- 19 |
Purple
- 20 |
|
The Stac-Pac™Kit |
| |
|
|
 |
 |
| |
|
|
| Designed for tight clearances or especially for
engines
running a magneto or Vertex/Hunt™ distributors. The stacked designed
separators maintain two-over-two ignition wires all the way to the valve cover.
As the wires split off to the spark plugs, an additional
2-place separator carries the remaining wires. Vertical mount brackets secure the
separators on the valve cover to support and secure the wires out of high heat areas.
Kits are available in 8 colors and include stainless steel fasteners.
Universal fit for most S/B and B/B Chevy, Ford, and Mopar.
|
| |
|
|
|
Stac-Pac Wire Loom Kit - Fits 7/8mm
Wire - Part # 50-556-__ |
Color
Codes for Wire Looms. Please add appropriate number to end of part number when
ordering. |
| Black
- 11 |
Blue
- 12 |
Red
- 13 |
Yellow
- 15 |
Teal
- 16 |
Orange
- 17 |
Gray
- 19 |
Purple
- 20 |
|
Spin N
Snap Wire Loom Kit |
|
|
|
 |
 Align
an opening to the outer ring slot. Place wire inside and turn inner
ring to next available opening. |
 Place
next wire into slot and continue to turn inner ring. |
 Continue
until all slots are filled. Place inner ring so it is no longer
aligned with outer ring so wires stay securely inside separator. |
|
Allows your wire separators to be positioned vertically on your engine.
No tools required to attach wires to loom kit. Contains 6 brackets
and 2 each, 2-place, 3-place, and four
ea., 4-place separators to loom all the way to the distributor.
Available in eight colors for 7-8mm. |
Have a
question about Made For You Products?
To contact us direct: (760) 868-6962 or Fax: (760) 868-2131
Made For You® Products,
L.L.C. ©2006
Back to Top
|
For
Fasteners, T-Clamps, and Wire Looms for any